|
SCSI-IDE Bridge (a type of adaptor):
Use a normal IDE hard disk instead of a SCSI disk. Allows an IDE disk to
connect to a SCSI controller. 40 pin IDE to 50 pin or 68 pin SCSI $399
MC1 has hard to
obtain SCSI cables, terminators and adaptors*
SCSI-3
 | SCSI-3 68 pin
cable, 9 connectors, twisted pair
(LVD/SE) $69 |
| SCSI-3 68 pin
cable, 6 connector cable $59 |
Quality without
the price! LVD/SE cables are rated to double (or more) the speed of
normal SCSI-3 but remain compatible with SCSI-3 Nb. More cables can be
found in the Used Parts section
SCSI-2
| SCSI-2
internal cables with 2 x 50 female connectors $19 |
|
SCSI-2 internal cables
3*50 pin
female connectors $25 |
|
SCSI external cable 25 pin male
connector to 50 pin male centronics $59 (lesser quality cable $39) |
IDE
| IDE ATA-100 high
speed Cable,
40 pin with 40 extra ground wires (80 lines in total) $20 |
| IDE standard 40 pin cable
with 3 connectors $10 |
| Home made A4000
male IDE terminators which turn off your A4000's IDE controller
for faster booting when using SCSI $29 |
|
|
|
MC1 has a lots of hard to get adaptors.
Future proof your Amiga:
| Use newer and faster parts on
older machines by using our wide range of adaptors. |
Backwards compatibility:
| Use old parts on your new
Amiga by using our wide range of adaptors. |
Flexibility:
| Don't buy a new cable. Buy an
adaptor to convert your cable e.g. DB 50 cable to DB 25. This is a much
more flexible solution. |
SCSI-3
Adaptors with
termination
| Female to Female Internal 68
pin SCSI-3 to 50 pin IDC Top 8 bits
terminated! Stops Signal bounce on unterminated pins. This is
recommended for Cyberstorm PPC owners! Connect a SCSI-2 drive to a
SCSI-3 cable Normally $99 now just $59 |
| Male to Male Internal 68 pin
SCSI-3 to 50 pin IDC Top 8 bits terminated!
Stops signal bounce on unterminated pins! This is recommended for
CyberstormPPC owners! $99 |
| External SCSI-3 68 male to 50
pin female (dense Honda) with active termination (plastic) $99
Nb. Terminated adaptors are almost impossible to get! |
Adaptors without termination
| Internal 68 pin male SCSI-3 to 50 pin male
IDC Connects a newer
SCSI-3 drive to an older SCSI-2 50 pin cable $45 |
| Internal 68 pin female SCSI-3 to 50 pin male
IDC Connect a SCSI-2 cable to a SCSI-3 cable $45 |
| Internal 68 pin female SCSI-3 to
IDC 50 pin female Connect a SCSI-2 device to a SCSI-3 cable $45 |
| External 68 pin male SCSI-3
(HP D-sub) to 50 pin female (HP D-sub: dense Honda type connector) $59
|
SCSI-2
| External Centronics 50 F to
DB25 male $49 |
Headers:
Allow you to break an
internal cable out of the box and give you somewhere to attach an
external device (Warp and Cyberstorm users!)
| 50 pin IDC male internal to 50
pin female (dense Honda 50) external $45 |
| 50 pin IDC male internal to DB
25 female external $45 |
Gender benders
| Centronics 50 Female to Female
$49 |
| DB 25 male to DB 25 Male SCSI $19 |
| DB 25 Female to DB25 Female
SCSI $19 |
SCART adaptor
|
21 pin SCART
plug, input/output switch, 1x 4 pin S-VHS input, stereo sound and
video RCA connectors (for 1081 & some 1084 monitors) $39 |
IDE
| 3.5" to 2.5" hard
drive adaptors (with power connector): plastic construction which
protects against shorting $39 |
Use these to convert your
2.5" hard drive in your A1200 to a 3.5"
Transfer info from a 2.5"
hard drive to a 3.5" HD on larger Amigas
NB. IDC 50 refers to the standard
ribbon cable that is used for 3.5" SCSI hard drives. More adaptors
are to be found in Used Parts. |
|
|
SCSI-3
| Terminator
SCSI-3 - active LVD/SE* 68 pin internal with 2 or 3 trouble shooting LED's (power/LVD/SE)
Female connector $59 |
*LVD/SE
terminators are used: the LVD/SE cables are rated to 2x the speed of
SCSI-3 but remain
compatible with SCSI-3.
SCSI-2
| DB 25 pin terminator with both
male and female ends (passive) $39 |
| Centronics 50 Male terminators (passive)
$19 |
| Centronics 50 Male terminators
(active) $49 |
| Internal 50 pin IDC with both
male & female ends (passive) plastic $39 |
| Internal 50 pin IDC with both
male & female ends (active) plastic $49 |
|
|
|
N.B. Drives can be found in Used Parts
Information
| SCSI-2 devices require a
PASSIVE terminator on each end of the chain |
| The SCSI-3 chain must have an
ACTIVE terminator
on each end of the cable |
| SCSI-3 drives can be used on SCSI-2 systems with a 50->68 pin internal
adaptor (future proofing + they tend to be faster) |
*Prices and specifications may change
without notice. |
 |
